Tile Table

My sister gave me her old patio furniture when I moved into my apartment that had a patio. And of course I decided the nice white table needed to be spiced up a bit. Having helped me mom (rather, watched my mom and sister) tile our kitchen floor when I was like 12 I had some idea what to do, and of course this wonderful post helped quite a bit too. This post gave very thorough directions, but here’s the alterations I made while making my table.

DSCF3523
First part: Sand the table
I tried, but my arm and the measly piece of sandpaper were no match for this professionally painted and finished table. So I ended up taking a razor blade to it and calling it “sanded”.

Step 2: Determine how you want you tiles laid out and make any necessary marks.
I had a large mosaic type tile I was putting in the middle, so I marked where it would be so I could attach the outside tiles first.

Step 3: Apply Adhesive, I used a premixed adhesive.

DSCF3530

Step 4: Place tiles, separating with tile spacers.
(I got creative and cut up straws as my spacers. I also applied my outside tiles first. Here is where I made a slight mistake. My table was smaller then the space I needed for the size tiles I had, so my tiles all hung over the edge about .5-1 inch. I just went with it, in retrospect I should have thought this through better. This would have been better executed had I bought a piece of wood the size I actually needed the table top to be, and attached it to the original.)

Step 5: Remove excess adhesive with a sponge or towel.

Step 6: Let it dry. I broke up the project over two weekends, so mine dried for several days.

Step 7: Grout it. For this you need a lot of grout, apply heavily.

IMG_0445

Step 8: Clean up the grout. Then use a sponge to remove the excess and smooth it out. It works best with a clean damp sponge. I filled a bucket with water to rinse, as you don’t want the grout building up on the sponge. I found that I had to do this several times in some spots to get an even layer of grout. Make sure to remove grout completely from the tops of tiles. Let dry before using. (I let mine sit for a few days, but the grout you use should say how long it needs to dry)

Step 9: Enjoy your masterpiece!!!

IMG_0448

A few words to the wise: Make sure your original surface is large enough (see step 4) for the tiles to completely rest on. Mine was not and my tiles hung off about an inch on all sides. I thought this would be fine. And in all reality it was…until it was time to move. In my move almost all of the white surrounding tiles broke off. It was a bit sad, but I enjoyed the table while I had it. I have now given the table to my best friend for her new apartment, even though it is missing all the white tiles. The bright side now she can enjoy whatever project she decides to try on this neat little table.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: